Part #: LPE12002-M8

Standards

  • ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
  • PCI Express base spec 2.0
  • PCI Express card electromechanical spec 2.0
  • Fibre Channel class 2 and 3
  • PHP hot plug-hot swap

Architecture

  • Dual-channel
  • 8Gb/s, 4Gb/s or 2Gb/s FC Link speeds automatically detected
  • Integrated data buffer and code space memory

Comprehensive OS Support

  • Windows, Linux, NetWare, Solaris, VMware
  • Additional support is available from OEMs and partners

Hardware Environments

  • PowerPC,® SPARC,® x86, x64 and Intel® Itanium® 64-bit processor family

Optical

  • Data rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)
  • Optics: Short wave lasers with LC type connector
  • Cable: Operating at 8Gb/s
    • 50/125 microns (500MHz*km BW)-up to 50m
    • 50/125 microns (2000MHz*km BW)-up to 150m

Physical Dimensions

  • Short, low profile MD2 form factor card
  • 167.64mm x 68.91mm (6.60″ x 2.71″)
  • Standard bracket (low profile available)

Power & Environmental Requirements

  • Volts: +3.3, +12
  • Operating temperature: 0° to 55°C (32° to 131°F)
  • Storage temperature: -40° to 70°C (-40° to 158°F)
  • Relative humidity: 5% to 95% non-condensing
  • 23 degree C wet bulb